Safari Snorkels
Click here for more information





ARB Bullbar Heavy Duty Front Bumpers
Click here for more information






ARB Side Rails & Steps
Click here for more information





ARB Heavy Duty Rear Bumpers
Click here for more information




Helton Hot Shower System


Helton Hot Water System



Helton Hot Water Shower Systems
Instant hot water on the trail, a must have!
Click here for more information

Helton BioFuel Heat Exchangers
Running bio diesel? Check these out!
Click here for more information







ARB & Engel Freezer/Refrigerator Units
Click here for more information





Auxiliary Lighting Products
Click here for more information



 


Recovery Gear Kits
Part# ARB RK9 - $375

KIT CONTENTS
- 1x P/No. ARB501 Recovery Bag Large
- 1x P/No. ARB705 17,500lb Snatch Strap
- 1x P/No. ARB730 26,500lb x 10’ Tree Trunk Protector
- 1x P/No. ARB720 9,900lb x 66’ Winch Extension Strap
- 1x P/No. ARB220 Recovery Damper
- 1x P/No. GLOVES Leather Recovery Gloves
- 2x P/No. ARB207D 10,640lbs, 3/4” Pin, D-Shackle
- 1x P/No. 10100020 Snatch Block 9000





Recovery Gear Individual Components
Click here for more information








National Luna Dual Battery Kit
Part# NATLUNA - $385.00







4x4 Adventure LED Light
Part# ARB 10500010 - $59.50
Durable 12-volt LED light, two hanging points, a 16-foot power cord with in-line switch, and comes complete with a canvas storage bag. Very low current draw of 1 amp

Adventure Light Holder
Part# ARB 225H - $5.50 (not shown)
We found these wonderful contraptions during our visit to ARB's facilities in Australia last summer. The simple hanger makes for a convenient mounting point on a roof rack or awning pole. Works with the new LED light as well as the older ARB225.






Ready Welder II Portable Welders
Click here for more information






Rooftop Tents, Awnings & Accessories
Click here for more information






Bushranger Exhaust Jack
Click here for more information






Bushranger Sand Track Series II
Portable Traction Devices
Bushranger sand tracks are designed for gaining traction in sand, snow or mud. Sold as a pair.

Part# ARB 54X07 - $232.50/pair






Portable Compressor
Features the robust and popular CKMA12 compressor in a standalone portable box. Simply attach the power leads to a 12 volt power source and your in business. Includes the hose, tire valve fitting and an assortment of additional fittings for airing up your air mattress float tube.

Part# ARB CKMP12 - $325..50






Roof Racks
Click here for more information





Pull Pal Recovery Units
Click here for more information






Tire Products

 

ARB Speedy Seal Puncture Repair Kit
Part# ARB10000010 - $39.50
Coming in a compact carry case, the Speedy Seal includes all the components necessary to repair tubeless radial or cross ply tires, without removing the tire from the vehicle or rim. This includes a quality pencil type tire gauge with dual pressure range and dual chuck, insertion and reamer tools, lubricant, additional valve accessories and 30 self vulcanizing repair cords for complete air sealing.
 

E-Z Tyre Deflator
Part# ARB 505 - $38.50
The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing accurate tire reading via the simple movement of a sliding valve. 


 
 





AIR LOCKER PARTS & ACCESSORIES
Click here for more information



 

ARB

ARB Camp Chair
Part# ARB 10500100US - $49.50/each

Features include:
- Made from a durable nylon Oxford weave material with webbing binding
- Robust alloy frame
- Extruded aluminum arm rests for comfort and strength
- Locking catches for added frame strength
- 260lbs rating
- Padded seat and back rest for extra warmth and comfort
- Embroidered ARB Sport logo
- Drink holder pouch
- Side pocket with Velcro flap
- Mesh magazine pocket a back of chair
- Durable matching carry bag with shoulder strap
- Built for maximum comfort with minimum space
- Folds down to 37” L x 11” W x 8” H




 

 

Trasharoo Logo

Trasharoo - Off Road Spare Tire Trash Bag - $45

Finally a clean and easy way to haul your trash, outside of your vehicle. Easily attaches to any tire up to 40". Hold up to 50lbs and is designed to utilize a standard 30 gallon trash bag for quick unloading when your back in civilization. Water resistant inner liner, 900 denier canvas and double stitched straps and buckles. Built to be used time and time again. Available in black, desert tan and olive drab green.

Standard Black - Part# TROOBLK
Desert Tan - Part# TROOTAN
Olive Drab Green- Part# TROOODG

 




 

Cargo Gear Storm Bag

Storm bags are a functional and sophisticated addition to the ARB product line. Featuring a body curve padded shoulder strap and seams that have been heat sealed and taped to ensure storm proofing, this product allows you to load your gear onto a roof rack or place it in the back of a truck, without the worry of your belongings getting wet.

Small - Part# ARB 10100300 - $74.50/each
Large - Part# ARB 10100350- $89.50/each




 

Scepter MFC Lid/Spout Wrench - $39

For use with Scepter Military Fuel Cans (MFC). The Rocking K Cap Wrench makes tightening your cap a cinch and removing the cap even easire. A must have item for anyone using Scepter Fuel Cans on a regular basis. Part# MFCWRENCH




 

The fjMount system allows you to vertically mount your Hi-Lift style jack to the side of your Land Cruiser giving you a great solution to a common issue: lack of space.  Utilizing an otherwise unused space in front of the driver's or passenger's door, the fjMount mounting bracket firmly secures a Hi-Lift style jack in position while the running board provides support. The stainless steel clevis pins provided in the fjMount kit ensures the jack base stays put and provides easy access to this vital component. Quick, safe removal and storage of your lifting tool is made possible with the fjMount easy-on easy-off fastening system: no tools are required to remove your jack from the mount. A few turns of the composite knob (available in both locking and non-locking) and removal of the jack base retaining pins and you are on your way. Security is provided through the pin-lock located on the end of the 3/8" stainless steel security bolt. The fjMount is made of 11 gauge hardened steel that is powder coated for durability against the elements. Available in both left hand and right hand mounting applications.

Standard Kit - Part# FJMTSL/FJMTSR - $110/each
Deluxe Locking Kit - Part# FJMTDL/FJMTDR - $120/each
(Fits 64-84 FJ40/45/47 Land Cruisers)




Prices subject to change without notice - Prices updated 07/01/11


Drive Train I Suspension I Performance I Exterior Parts I Interior Parts I Accessories I Advance Adapters I Toyota OEM Parts
Used Parts I Custom Fabrication I Line Card I Land Use I Specials
Home I Customer Comments I About Us I Contact Us / Order I Photo Gallery

© 2003 - 2012 Cruiser Outfitters I Website Built by College Internet Solutions & Maintained by Cruiser Outfitters